Sign in
12thPass logo
New chatPYQ LibraryDoubtsRank report
Sign in to see Recents

Your guest activity stays on this device

Sign in to save progress →
Sign in

Alternating Current question

2006 · Q140
Guest · filters and generic practice availableBrowsing as a guest · PYQ filters and generic practice are available. Sign in only for personalised features and saved progress.
  1. PYQ Library
  2. /NEET
  3. /Physics
  4. /Alternating Current
  5. /2006 · Q140

Alternating Current question

2006 · Q140

NEETPhysicsAlternating CurrentMCQ+4 / −1
The core of a transformer is laminated because
  1. A
    ratio of voltage in primary and secondary may be increased
  2. B
    energy losses due to eddy currents may be minimised
  3. C
    the weight of the transformer may be reduced
  4. D
    rusting of the core may be prevented.
View written solutionFree

Correct answer: B

The core of a transformer is laminated to minimise the energy losses due to eddy currents.

PreviousNext

More from Alternating Current

  • In a circuit L, C and R are connected in series with an alternating voltage source of frquency f. The current leads the voltage by 45o. The value of C is2005 · MCQ
  • A coil of 40 henry inductance is connected in series with a resistance of 8 ohm and the combination is joined to the terminals of a 2 volt battery. The time constant of the circuit is2004 · MCQ
  • For a series LCR circuit the power loss at resonance is2002 · MCQ
  • A capacitor of capacity C has reactance X. If capacitance and frequency become double then reactance will be2001 · MCQ
  • The value of quality factor is2001 · Multiple correct
  • To an ac power supply of 220 V at 50 Hz , a resistor of 20Ω, a capacitor of reactance 25Ω and an inductor of reactance 45Ω are connected in series. The corresponding current in the circuit and the phase angle…2025 · MCQ
  • In an ideal transformer, the turns ratio is NS​NP​​=21​. The ratio VS​:VP​ is equal to (the symbols carry their usual meaning) :2024 · MCQ
  • A 10μF capacitor is connected to a 210 V,50 Hz source as shown in figure. The peak current in the circuit is nearly (π=3.14) : Includes diagram2024 · MCQ