NEETPhysicsAlternating CurrentMCQ+4 / −1
The primary of a transformer when connected to a dc battery of 10 Volt draws a current of 1 mA. The number of turns of the primary and secondary windings are 50 and 100 respectively. The voltage in the secondary and the current drawn by the circuit in the secondary are respectively
- A20 V and 2.0 mA
- B10 V and 0.5 mA
- CZero volt and therefore no current
- D20 V and 0.5 mA
View written solutionFree
Correct answer: C
Transformer cannot work on dc.
Vs = 0 and Is = 0
More from Alternating Current
- A coil of self-inductance L is connected in series with a bulb B and an AC source. Brightness of the bulb decreases when2013 · MCQ
- The instantaneous values of alternating current and voltage in a circuit are given as sin (100 t) ampere Volt The average power…2012 · MCQ
- The current in the inductance is varying with time according to the plot shown in figure. Which one of the following is the correct variation of voltage with time in the coil ? Includes diagram2012 · MCQ
- In an electrical circuit R, L, C and a.c. voltage source are all connected in series. When L is removed from the circuit, the phase difference between the voltage and the current in the circuit is If instead, C is removed from the circuit,…2012 · MCQ
- A coil has resistance 30 ohm and inductive reactance 20 ohm at 50 Hz frequency. If an ac source, of 200 volt, 100 Hz, is connected across the coil, the current in the coil will be2011 · MCQ
- The r.m.s. value of potential difference V shown in the figure is Includes diagram2011 · MCQ
- An ac voltage is applied to a resistance R and an inductor L in series. If R and the inductive reactance are both equal to 3 , the phase difference between the applied voltage and the current in the circuit is2011 · MCQ
- In the ac circuit an alternating voltage e = sin100t volts is connected to a capacitor of capacity 1 F. The r.m.s. value of the current in the circuit is2011 · MCQ