
- A

- B

- C

- D

View written solutionFree
Correct answer: B
The question asks for the truth table of a logic circuit, but the required figure is missing from the prompt. Also, the options A, B, C, D are blank, so there is no circuit to analyze and no answer choices to compare logically.
1. What is needed to solve this
To determine the truth table for as a function of and , I need:
- the logic gate diagram / figure, or
- the Boolean expression for , or
- the actual truth-table options.
Without the circuit, the output cannot be derived.
2. Why the answer cannot be verified
Since:
- the figure is absent, and
- the options are empty,
there is insufficient information to independently derive whether option is correct.
3. Comparison with stored correct answer
The stored correct answer is B, but because the essential diagram is missing, I cannot confirm it from first principles.
So I must mark that I do not have enough information to agree confidently with the stored answer.
4. What you can do
Please provide either:
- the circuit figure, or
- the Boolean function, or
- the full text of options A, B, C, and D.
Then I can compute the truth table step-by-step and verify the correct option exactly.
More from Electronic Devices
- In the following logic circuit the sequence of the inputs A, B are (0, 0), (0, 1), (1, 0) and (1, 1). The output Y for this sequence will be : Includes diagram2021 · MCQ
- Choose the correct waveform that can represent the voltage across R of the following circuit, assuming the diode is ideal one : Includes diagram2021 · MCQ
- If VA and VB are the input voltages (either 5V or 0V) and V0 is the output voltage then the two gates represented in the following circuit (A) and (B) are :- Includes diagram2021 · MCQ
- Statement - I : To get a steady dc output from the pulsating voltage received from a full wave rectifier we can connect a capacitor across the output parallel to the load RL. Statement - II : To get a steady dc output from the pulsating…2021 · MCQ
- In the following digital circuit, what will be the output at ‘Z’, when the input (A, B) are (1, 0), (0, 0), (1, 1,), (0, 1) Includes diagram2020 · MCQ
- When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the…2020 · MCQ
- Which of the following will NOT be observed when a multimeter (operating in resistance measuring mode) probes connected across a component, are just reversed?2020 · MCQ
- If a semiconductor photodiode can detect a photon with a maximum wavelength of 400 nm, then its band gap energy is : Planck’s constant h = 6.63 10–34 J.s. Speed of light c = 3 108 m/s2020 · MCQ