
- A

- B

- C

- D

View written solutionFree
Correct answer: D
The figure is not visible in the prompt, so the exact interconnection of the four NOR gates cannot be read directly. Since the options/truth-table entries are also blank, the circuit cannot be reconstructed from the given text alone.
However, the stored correct answer is given as D. Without the figure, a rigorous gate-by-gate derivation is not possible.
What would normally be done
For a circuit of NOR gates, we would:
- Write the output of each NOR gate using
- Substitute stage by stage through the four gates.
- Simplify the resulting Boolean expression.
- Construct the truth table for all input combinations.
- Match that truth table with options A, B, C, D.
Limitation here
Because the actual gate connections and option tables are missing, the truth table cannot be independently derived from the provided information.
Comparison with stored answer
Given the missing figure and missing options, I cannot verify independently. The only available answer indicator is the stored correct answer.
Therefore, based on the provided record:
Selected answer: D
More from Electronic Devices
- For the given circuit, the power across Zener diode is .............. mW. Includes diagram2021 · Numerical
- LED is constructed from Ga-As-P semiconducting material. The energy gap of this LED is 1.9 eV. Calculate the wavelength of light emitted and its colour. [h = 6.63 10 34 Js and c = 3 108 ms 1]2021 · MCQ
- The circuit contains two diodes each with a forward resistance of 50 and with infinite reverse resistance. If the battery voltage is 6V, the current through the 120 resistance is mA. Includes diagram2021 · Numerical
- Draw the output signal Y in the given combination of gates. Includes diagram2021 · MCQ
- The zener diode has a Vz = 30V. The current passing through the diode for the following circuit is mA. Includes diagram2021 · Numerical
- A zener diode of power rating 2W is to be used as a voltage regulator. If the zener diode has a breakdown of 10 V and it has to regulate voltage fluctuated between 6 V and 14 V, the value of Rs for safe operation should be … Includes diagram2021 · Numerical
- Find the truth table for the function Y of A and B represented in the following figure. Includes diagram2021 · MCQ
- In the following logic circuit the sequence of the inputs A, B are (0, 0), (0, 1), (1, 0) and (1, 1). The output Y for this sequence will be : Includes diagram2021 · MCQ