JEE MainPhysicsAlternating CurrentMCQ+4 / −1
Match List-I with List-II.
| List - I | List -II | ||
|---|---|---|---|
| (A) | AC generator | (I) | Detects the presence of current in the circuit |
| (B) | Galvanometer | (II) | Converts mechanical energy into electrical energy |
| (C) | Transformer | (III) | Works on the principle of resonance in AC circuit |
| (D) | Metal detector | (IV) | Changes an alternating voltage for smaller or greater value |
Choose the correct answer from the options given below :
- A(A) - (II), (B) - (I), (C) - (IV), (D) - (III)
- B(A) - (II), (B) - (I), (C) - (III), (D) - (IV)
- C(A) - (III), (B) - (IV), (C) - (II), (D) - (I)
- D(A) - (III), (B) - (I), (C) - (II), (D) - (IV)
View written solutionFree
Correct answer: A
-
Match each item in List-I with its function in List-II
(A) AC generator
- An AC generator converts mechanical energy into electrical energy.
- So, .
(B) Galvanometer
- A galvanometer is used to detect the presence of current in a circuit.
- So, .
(C) Transformer
- A transformer is used to change alternating voltage to a smaller or greater value.
- So, .
(D) Metal detector
- A metal detector works on the principle of resonance in AC circuit.
- So, .
-
Final matching
-
Compare with options
This corresponds to Option A.
-
Comparison with stored correct answer
- Derived answer: A
- Stored correct answer: A
- Hence, they agree.
More from Alternating Current
- If wattless current flows in the AC circuit, then the circuit is :2022 · MCQ
- A sinusoidal voltage V(t) = 210 sin 3000 t volt is applied to a series LCR circuit in which L = 10 mH, C = 25 F and R = 100 . The phase difference () between the applied voltage and resultant current will be :2022 · MCQ
- In a series LCR circuit, the inductance, capacitance and resistance are L = 100 mH, C = 100 F and R = 10 respectively. They are connected to an AC source of voltage 220 V and frequency of 50 Hz. The approximate value of… Includes diagram2022 · Numerical
- In a series circuit and power factor of the circuit is . When capacitor with capacitance such that is put in series, the power factor becomes . The ratio is:2022 · MCQ
- The effective current I in the given circuit at very high frequencies will be A. Includes diagram2022 · Numerical
- A 110 V, 50 Hz, AC source is connected in the circuit (as shown in figure). The current through the resistance 55 , at resonance in the circuit, will be A. Includes diagram2022 · Numerical
- A direct current of and an alternating current of peak value flow through resistance of and respectively. The ratio of heat produced in the two resistances in same interval of time…2022 · MCQ
- To light, a lamp is connected, in series with a capacitor of capacitance , with source. The value of will be …2022 · Numerical